82% of UK homes could get full fibre in January 2026, up from 78% in July 2025, according to Ofcom's Connected Nations spring 2026 update. The figure includes Openreach's own full fibre network and the networks of independent operators, known as altnets.
Key takeaways
|
What is standard fibre (FTTC) broadband?
Standard fibre broadband in the UK refers to fibre-to-the-cabinet (FTTC) technology. In an FTTC connection, an optical fibre cable runs from the telephone exchange to a green street cabinet near the property. From that cabinet, the existing copper telephone wire carries the signal the remaining distance to the property. This final copper section, sometimes called the local loop, limits the maximum speed the connection can achieve; the longer the copper run, the lower the attainable speed.
FTTC broadband is sold under names such as Superfast Fibre (BT), Superfast (Sky), and similar terms by various providers. It is also being deployed as SoGEA (Single Order Generic Ethernet Access), which delivers the FTTC signal without requiring a separate phone line product. Typical average download speeds for FTTC packages sit between 35 Mbps and 80 Mbps depending on the package tier and distance from the cabinet. Upload speeds on FTTC are considerably lower than download speeds, typically 9 to 20 Mbps. For background on the oldest copper-based technology that preceded FTTC, see ADSL Broadband UK.
What is full-fibre (FTTP) broadband?
Full-fibre broadband refers to fibre-to-the-premises (FTTP) technology, also called ultrafast or pure fibre. In an FTTP connection, an optical fibre cable runs continuously from the exchange all the way to the individual property, with no copper section in between. Because light signals in optical fibre suffer far less signal degradation than electrical signals in copper, FTTP connections can deliver much higher speeds and are less affected by distance from the exchange.
FTTP packages in the UK are sold from as low as 75 Mbps average download speed up to 5,000 Mbps (5 Gbit/s) on the most advanced packages available from some providers. Upload speeds on FTTP are typically a much larger proportion of the download speed than on FTTC: for example, Sky's Full Fibre 500 package advertises 500 Mbps download and 60 Mbps upload, while its Superfast FTTC product offers 67 Mbps download and only 16 Mbps upload. At the gigabit tier, some FTTP products offer symmetrical or near-symmetrical speeds (same upload as download).
Ofcom's Connected Nations spring 2026 update (May 2026) showed that 82% of UK homes could get full fibre in January 2026, up from 78% in July 2025. This figure includes Openreach's own FTTP network and those of independent altnet operators. For current UK broadband infrastructure statistics, see UK Broadband Statistics 2026.
Side-by-side comparison: FTTC vs FTTP
| Attribute | Standard fibre (FTTC) | Full fibre (FTTP) | Source |
|---|---|---|---|
| Technology | Fibre to cabinet, copper to property | Fibre all the way to the property | Ofcom |
| Typical download speed range | 35 to 80 Mbps (address-dependent) | 75 Mbps to 5,000 Mbps (package-dependent) | sky.com / virginmedia.com |
| Typical upload speed | 9 to 20 Mbps (much lower than download) | 16 Mbps to 5,000 Mbps (much higher proportionally) | sky.com |
| Speed affected by distance from cabinet? | Yes - longer copper run = lower speed | No - speed not limited by local loop copper | Ofcom |
| UK premises coverage (2025) | Superfast (30+ Mbit/s) includes FTTC; not reported in Ofcom's spring 2026 update | 82% of homes can get full fibre (January 2026) | Ofcom CN 2025 |
| Example entry promotional price | Sky Superfast (67 Mbps): £24/month [sky.com] | Sky Full Fibre 100 (100 Mbps): £25/month [sky.com] | sky.com (June 2026) |
| Example standard price (out of contract) | Sky Superfast: £49/month [sky.com] | Sky Full Fibre 100: £44/month [sky.com] | sky.com (June 2026) |
| Installation required? | Usually no new installation if existing phone line; engineer may be required for activation | Engineer visit required to install the fibre termination point (ONT) at the property if not already present | bt.com / providers |
| Network operators | Primarily Openreach (BT's network division) | Openreach, Virgin Media (cable/HFC), and independent altnet operators | Ofcom CN 2025 |
Speed: the most important practical difference
The gap between FTTC and FTTP is most visible in upload speeds and at the upper end of the download range. A typical FTTC Superfast package delivers around 67 Mbps download and 16 Mbps upload. A mid-range FTTP package such as Sky's Full Fibre 300 delivers 300 Mbps download and 40 Mbps upload. For tasks that are primarily download-focused, such as streaming video and general web browsing, FTTC at 67 Mbps is adequate for most households. For households with multiple simultaneous users, large file uploads, video calling in both directions, or cloud backup, the higher upload of FTTP is a meaningful improvement.
At the top end, FTTC cannot approach the speeds available from FTTP. The fastest standard FTTC products typically cap at around 80 Mbps; the fastest FTTP products available from mainstream UK providers are measured in gigabits per second. Virgin Media's Gig1 cable product delivers an average of 1,136 Mbps on its HFC network; Sky's Full Fibre 5 Gigafast+ offers 5,000 Mbps on FTTP. These speeds exceed the capacity of most home Wi-Fi setups and are not relevant to typical household usage, but they illustrate the scale of the technology difference.
Pricing: is full fibre actually more expensive?
At the promotional level, the cost difference between entry FTTC and entry FTTP is now very small for many providers. Sky's data from June 2026 shows Superfast (67 Mbps, FTTC) at £24 per month and Full Fibre 100 (100 Mbps, FTTP) at £25 per month on promotion. An extra £1 per month delivers a 49% increase in advertised average download speed and substantially higher upload performance. Ofcom's Pricing and Consumer Engagement 2025 report noted that in many cases, customers can switch to a faster, more reliable full-fibre service and pay the same or less than for a copper or part-fibre service.
At the standard (out-of-contract) rate, FTTC and FTTP prices can diverge more significantly depending on the provider and tier. At Sky, Superfast standard pricing is £49 per month while Full Fibre 100 standard is £44 per month, meaning full fibre is actually cheaper out of contract at that comparison point. Households comparing cost should therefore compare like-for-like speed tiers at both promotional and standard rates. For a broader cost overview, see Best Broadband Deals UK.
Availability: where each technology is accessible
FTTC part-fibre broadband reaches homes that full fibre does not yet cover. Full fibre is available to 82% of UK homes as of January 2026, up from 78% in July 2025, and the rollout is ongoing. For the approximately 18% of homes not yet covered by full-fibre infrastructure, FTTC remains the fastest fixed-line option in most cases (rural areas may only have ADSL). Ofcom's coverage checker at https://checker.ofcom.org.uk/en-gb/broadband-coverage allows address-level checks of what technologies are available.
Virgin Media's cable (HFC) network, which delivers speeds comparable to FTTP but uses coaxial cable rather than optical fibre for the final section, adds an alternative in areas it covers. For detail on what Virgin Media's network covers, see Virgin Media Broadband Deals UK 2026. For Sky's equivalent, see Sky Broadband Deals UK 2026.
Installation: what changes when switching from FTTC to FTTP
Switching to FTTP from FTTC does not require replacing all internal wiring in most homes, but it does require a new fibre termination point (ONT, or Optical Network Termination) to be installed at the property boundary or inside the property by an engineer. This is a physical installation that typically takes one to two hours. Providers usually include this as part of the package or charge a one-off installation fee; checking the specific terms before ordering is advisable.
If a property has never had FTTP installed before, an engineer must run the fibre cable from the nearest point of the full-fibre network to the ONT. If a previous occupant already had FTTP installed, the infrastructure may already be in place and activation may be quicker. FTTC installations, by contrast, often use the existing telephone line infrastructure and can be activated remotely in many cases.
Verdict: which to choose
Standard fibre (FTTC) broadband is suited to: households where FTTP is not yet available; households where current speeds (35-80 Mbps) are adequate for their actual usage; and situations where maintaining the lowest possible monthly cost is the primary consideration. Full-fibre (FTTP) broadband is suited to: households that want speeds above 80 Mbps; households with multiple simultaneous users or high upload demand; and those who want access to gigabit-tier packages for future-proofing. At many addresses and promotional price points, the monthly cost difference is now minimal, making FTTP the preferable option on a pure speed-per-pound basis where it is available.
Editorial disclaimer: This page is for informational purposes only and reflects published data and provider pricing at the time of writing (June 2026). Broadband speeds, prices, availability, and technology designations change frequently and depend on address. Always verify current availability and pricing directly with providers and using Ofcom's coverage checker before making any purchasing decision.
What is the difference between fibre and full-fibre broadband?
Standard fibre (FTTC) broadband uses optical fibre to a street cabinet and then copper telephone wire for the final section to the property. Full-fibre (FTTP) broadband uses optical fibre all the way from the exchange to the property with no copper section. Full fibre delivers higher and more consistent speeds, and is unaffected by the length of the copper run that limits FTTC performance.
Is full-fibre broadband available at my address?
As of January 2026, 82% of UK residential premises had access to full-fibre broadband, per Ofcom's Connected Nations 2025 report. Coverage varies by address. Check availability using Ofcom's coverage checker at https://checker.ofcom.org.uk/en-gb/broadband-coverage or the individual provider's postcode checker.
Is full-fibre broadband more expensive than standard fibre?
Not necessarily. At the promotional price level in June 2026, Sky offered its Superfast (67 Mbps, FTTC) at £24 per month and its Full Fibre 100 (100 Mbps, FTTP) at £25 per month. Ofcom's 2025 pricing report noted that customers can often switch to full fibre for the same or less than a standard fibre package. Prices vary by provider, package tier, and contract terms.
Do I need an engineer to install full-fibre broadband?
Yes, in most cases. Switching to FTTP requires installation of an Optical Network Terminal (ONT) at the property, which requires an engineer visit. If a property already has FTTP infrastructure from a previous occupant, activation may be simpler. FTTC installations often use existing phone line infrastructure and can sometimes be activated remotely.
What upload speeds can I expect from full fibre versus standard fibre?
FTTC superfast packages typically offer upload speeds of 9 to 20 Mbps, substantially lower than the download speed. FTTP packages offer proportionally much higher upload speeds: Sky's Full Fibre 300 package offers 40 Mbps upload alongside 300 Mbps download, and its Full Fibre 500 offers 60 Mbps upload. At the multi-gigabit tier, some products offer fully symmetrical upload and download speeds.
Full fibre providers and prices compared: best full fibre broadband deals
Quick answers
What is FTTC broadband?
FTTC broadband is fibre to the cabinet: an optical fibre cable runs from the telephone exchange to a green street cabinet, then existing copper telephone wire carries the signal the remaining distance to the property. This copper local loop limits maximum speed, and longer copper runs reduce attainable speed. Typical average download speeds are 35 Mbps to 80 Mbps, with uploads of 9 to 20 Mbps.
Is FTTP better than FTTC?
FTTP delivers higher and more consistent speeds than FTTC because no copper section limits performance. FTTC typically offers 35 to 80 Mbps download and 9 to 20 Mbps upload, while FTTP ranges from 75 Mbps to 5,000 Mbps with proportionally higher uploads. FTTP speed is not reduced by distance from the cabinet. At promotional prices, the gap can be as low as £1 per month.
What does fibre to the premises mean?
Fibre to the premises means an optical fibre cable runs continuously from the telephone exchange all the way to the individual property, with no copper section in between. FTTP is what Ofcom calls full fibre; ultrafast is a speed band of 100 Mbit/s or more, not a type of line. Because light signals in optical fibre suffer far less signal degradation than electrical signals in copper, FTTP connections can deliver much higher speeds and are less affected by distance from the exchange.
Related in this guide series |
Full fibre coverage, Ofcom spring 2026 Ofcom's Connected Nations spring 2026 update, based on January 2026 data, shows full fibre reaches 82 per cent of UK homes, equivalent to 24.9 million of 30.5 million properties. Gigabit-capable broadband now covers 89 per cent of homes, or 27.1 million, up from 87 per cent in July 2025. There are 12.4 million full-fibre connections, representing 47 per cent of premises where full fibre is available. The number of homes unable to get decent broadband, defined as 10 Mbit/s download and 1 Mbit/s upload from a fixed line or fixed wireless network, has fallen to 39,000 from 44,000. The figures indicate continued expansion of full-fibre and gigabit-capable networks across the UK, alongside a reduction in the number of premises without access to decent broadband. |
Full fibre questions answered
Checked 29 October 2026 against the sources listed.
Can I get full fibre broadband?
82% of UK homes could get full fibre in January 2026, 24.9 million of 30.5 million homes, and 89% could get gigabit-capable broadband, according to Ofcom's Connected Nations spring 2026 update published on 13 May 2026. Availability at a single address is shown by Ofcom’s broadband checker and the Openreach fibre checker, which says whether full fibre can be ordered now, is coming soon or is planned.
Is full fibre worth it?
Ofcom's last home broadband performance report measured a median 24-hour download speed of 149.2 Mbit/s on full fibre against 55.7 Mbit/s on part-fibre (FTTC) lines, using March 2023 data. A part-fibre line runs on copper from the street cabinet, and its top speed depends on the length and quality of that copper. 12.4 million premises had taken full fibre by January 2026, 47% of those able to get it. Openreach plans to retire the analogue phone network (PSTN) by 31 January 2027.
What is the difference between FTTC and FTTP?
FTTP (fibre to the premises) is what Ofcom calls full fibre: fibre all the way to the home. FTTC (fibre to the cabinet) is part-fibre: fibre to the street cabinet, then copper. Under Ofcom's guidance, applied from 16 September 2024, the word fibre on its own is not to be used to describe a connection. Superfast (30 Mbit/s or more) and ultrafast (100 Mbit/s or more) are speed bands, not types of line.
What protections apply when switching to full fibre?
Under One Touch Switch, live since September 2024, a customer contacts only the new provider, pays no notice-period charges after the switch date and gets compensation if the switch fails or service is lost for more than one working day. Since 17 January 2025, price rises in new contracts must be set out in pounds and pence. Providers signed up to Ofcom's broadband speeds code (BT, EE, NOW Broadband, Plusnet, Sky, TalkTalk, Utility Warehouse, Virgin Media and Zen) must let a customer leave without penalty if speeds fall below the guaranteed minimum and are not fixed within 30 days.
Sources: Ofcom Connected Nations spring 2026; Ofcom broadband checker; Openreach fibre checker; Ofcom home broadband performance, March 2023 data; Ofcom broadband terminology guidance; Openreach PSTN switch-off; Ofcom One Touch Switch; Ofcom price rise rules; Ofcom broadband speeds code